Polyurethane Cast Screening Systems

Multotec’s hand cast polyurethane facility offers a wide range of products designed to suit your requirements. Heavy-duty modular screen panels, large bolt-down panels, polyurethane sievebends, liners, jig panels and accessories.

All Multotec panels are designed with self-relieving apertures resulting in unimpeded downward movement of sized particles.

There are three types of Hand Cast panels namely:

Spaltoflex:	Injection moulded modules 120 x 120mm with slotted apertures cast into larger panels.
Forsiplast:	Injection moulded modules 120 x 120mm with square apertures cast into larger panels.
Losiplast:	Loose cores are used to hand cast panels with either square, slotted round or teardrop shaped apertures.

Heavy Duty Panels

Manufactured in modular or bolt-down panels with fully embedded or semi-embedded frames in sizes to suit your requirements.

Tensioned Polyurethane Panels

Tensioned polyurethane panels are manufactured in a range of sizes and can be side or end tensioned units. They have a particularly live surface reducing pegging and blinding. The panels can be designed to have solid impact areas, weir bars and deflectors.

Major Benefits of Cast Screening Systems

Long life due to high wear resistance
Precise sizing maintained for long periods
Self relieving apertures reducing pegging & blinding
Wide range of apertures available to suit most applications
Wide range of panel sizes to suit any frame or vibrating screen
Ability to fit any vibrating screen and duty
Manufactured to order
Quick simple installation and removal reducing downtime
Low noise factor

Accessories

Multotec manufactures a wide range of polyurethane screening accessories including side clamps, hold down bars, buccer strips and bolt protectors.

In addition, panels can be supplied with cast-on or bolton dividers, weirbars, skidbars or retarder bars. Trommel panels are supplied with either integral or bolt-on scrolls in varying heights and thickness.

Repair kits for Forsiplat and Spaltoflex panels


Kits consist of: Hot air blower with connecting flex, cutting knife, 50m welding cord and modules as required.	The cleaned panel is place on the working surface and the module to be replaced is removed with the cutting tool.

The polyurethane welding cord is fed through the blower, thus completing the weld	The edges of the welded component must be trimmed evenly and welded on both sides.