Rotating Plate Divider Sampler

- Used for continuous dry material splitting.
- Suitable for primary sampling as well as secondary division.
- Must be fed consistently, e.g. vibratoru feeder.
- Reliable and very cost effective.
- Ideal sampler for bulk materials handling systems.
- Designed to take multiple cuts of primary samples of feed.
Maintenance

- Mechanically very reliable.
- Lubricated for life.
- No operating spares required.
Construction
- Material - mild, VRN or 304 strainles steel.
- One sample port only.
- Multiple cutters possible. ( Maximum 4)
- Simple design and principle of operation.
Installation
- Self contained and robust unit.
- Easily installed and retrofitted
- Electric operation - 380, 440 or 525 vilts, 50/60Hz.
- Control voltaje 110v or 220v to suit customer requirements.
Accurate and Representative
- Secondary and tertiary division to produce single final sample.
- Pre-set cutters allow unbiased splitting.
- Cutter width minimum of 30mm( 1¾ inches)
- Division ratio of 1.0% to 50.o% possible.
- Cutter rotates at 0.6m/s (2ft/sec) or less.
